Category Archives: Tips

Samyang 8mm/2.8 on the NEX-7

CornerFix requires a reference shot in order to calculate a lens profile. This should be an shot of an evenly lit neutral surface. For a fisheye lens, this proves problematic as you cannot simply point it at a neutral grey card or white wall. I set up two flashes either side of the camera. I held up a white diffusion sheet so that it wrapped around the lens and gave full coverage over the angle of view (180 degrees diagonal). I then took several shots making sure that the image was not overexposed (no clipping).
Magenta lens cast in the corners due to oblique rays causing non-uniform response
CornerFix is able to compensate for the non-uniform response and reduce the colour casts

I just received my copy of the Samyang 8mm/2.8 fisheye in native NEX mount. I’ve tried it on the NEX-7 and have some very preliminary remarks. First the good news, it’s sharp, light, compact, pretty well made, and matches the form factor of the NEX-7 quite well. The only downside so far is the interaction of the lens with the sensor leading to magenta corners.

This lens colour cast is due to the way that off axis light rays interact with the filter stack on top of the sensor and the pixels themselves. The different coloured sites in the Bayer array are affected differently leading to colour casts. This can be a problem with certain lens designs where the exit pupil is situated close to the sensor (non-telecentricity).

To fix this, you can use CornerFix, a program which takes DNG files and applies a rescaling to the data to compensate for the lens colour cast. One has to first create a reference file from which the compensation can be calculated, not exactly straight forward for a 180 degree diagonal fisheye. I have made such a correction profile and people can download the file (you may need to right mouse click and choose “save link as”, or similar). The lens was set at f/5.6 but the profile should work more or less at other apertures. The correction isn’t perfect, but for most photographic scenery it corrects the majority of the colour cast, as well as the vignetting (which can be adjusted).

Photoworld Talk Addendum

Thanks to all who attended the Edinburgh Photoworld. I hope that people were able to get  something out of my talk. I took a pano at the start of the day (left). The full pano can be seen here. More of my panoramas can be found here.

I have had requests for the links I gave at the end of my talk. Here are some links below, it’s by no means exhaustive, but hopefully they will be able to get you started.

I also run panorama photography courses for medium and advanced photographers. Please contact me if you are interested in attending a session. Small group tuition is also available.

Hardware

  • Nodal Ninja. Recommended manufacturers of panoramic heads.
  • Agnos. Italian manufacturer of panoramic heads.
  • Red-door. UK reseller of panoramic equipment.
  • 360 Tactical VR. Local reseller of panoramic equipment.

Software

  • Hugin. Open source free software for assembling panoramas. (multi-platform)
  • wiki.panotools.org. Information source for panoramic photography.
  • PTGui. Commercial pano software (PC).
  • PTAssembler. Commercial pano software (PC)
  • Calico. Commercial pano software (Mac)

 Viewing

  • Panozona. Open source, free software for constructing VR Tours
  • DevalVR. Free (non-open) local viewer
  • Gigapan. Share gigapixel panos.
  • HD View. Microsoft technology for displaying high resolution panoramas.
  • Zoomify. Software for zoomable display.

General Information

Fake Battery?

The battery on the NEX-7 is quite small, 1080mAh at 7.2V. With the EV, LCD and LiveView, this means that a spare battery or three is essential. I went onto Amazon to look for genuine spare NP-FW50 batteries and one seller was offering them at less than half the price of the typical seller. If something sounds too good to be true, it probably is. When I received the battery, the packaging looked authentic, hologram and all, but the battery itself looked subtly different from the one I got with the camera.

The major differences I can spot are:

  • The battery casing is different, the suspect one does not have the grooves behind the label
  • The printing is different, crisper on the genuine one, e.g. the QR code
  • There is text missing on the suspect battery, “2ICP9/30/39” which appears on the genuine one
  • The engraving on the bottom right is different
  • The shape of the connectors on the top right is different
  • The colour of the top right corner is a different shade of cyan

I’m trying to get confirmation from Sony whether the battery from Amazon is genuine or not. So far, the battery is working. It charges up and displays percentage charge remaining on the camera. I’m not familiar enough with the run time of the genuine battery to tell whether the Amazon battery has the same amount of juice. The issue however is that I could have just bought for even less money a non-fake third-party spare battery which would have performed just as well.